dval3812 dval3812

16-12-2022
Physics

Answered

To receive AM radio, you want an RLC circuit that can be made to resonate at any frequency between 500 and 1650 kHz. This is accomplished with a fixed 3.83 µH inductor connected to a variable capacitor. What range of capacitance (in nF) is needed?

Answer :

Other Questions

three capacitors having capacitances of 8.4, 8.4, and 4.2 mf are connected in series across a 36 v potential difference. (a) what is the charge on the 4.2 mf ca

consider the following figure. a strand has one end tied to a wall, extends across a small fixed pulley, and the other end is tied to a hanging object. the tota

Use this free body diagram to help you find the magnitude of the force F1 needed to keep this block in static equilibrium.

a circuit that has gaps that stop electrons from flowing from one side of the power source to the other. A. True B. False

to measure her speed, a skydiver carries a buzzer emitting a steady tone at 1 800 hz. a friend on the ground at the landing site directly below listens to the a

two in phase loudspeakers are some distance apart. a person stands 5.80 m from one speaker and 4.00 m from the other. what is the second lowest frequency at whi

a car with the windows rolled down is traveling north on a road at a speed of 23.0 m/s. a police car, traveling south at a speed of 38.0 m/s, approaches with it

a 35-lb suitcase sits on a rubber ramp at an airport carousel at a 20° angle. the weight vector can be broken into two perpendicular components. a) what is the

a bar phantom of thickness 0.5 cm is uniformly irradiated by monoenergetic x-ray photons, and a detector is placed behind the phantom to detect the x-ray photon