cobalt2793 cobalt2793

08-11-2022
Physics

Answered

an lc circuit is to be constructed so that the oscillations in its current mimic the oscillations of a mass of 1.6 kg attached to a horizontal spring of spring constant 1.9 n/m and free to slide on a frictionless horizontal surface. find what inductance the circuit should have for its current to oscillate with the same frequency as the mass and spring if the capacitance is 1.6 f.

Answer :

Other Questions

an object of mass 2.9 kg is attached to a spring that has a spring constant of 69 n/m. suppose the spring is stretched a maximum distance of 0.136 m before the

a 0.415-kg mass suspended from a spring undergoes simple harmonic oscillations with a period of 1.25 s. how much mass, in kilograms, must be added to the object

the potential energy of a particular mass-spring system is 10 j when the spring is stretched by a distance of a. what is the potential energy when the same mass

(a) find the effective resistance of the circuit. (b) suppose the 3w resistor has a voltage difference of 6v across it. what is the value for the current throug

3) connect two lamps to a power supply in series and current drawn from the power supply is is. connect the same two lamps in parallel and the current drawn fro

if the mass of the ladder is 12.0 kg , the mass of the painter is 55.0 kg , and the ladder begins to slip at its base when her feet are 70% of the way up the le

a uniform horizontal beam 8 m long is attached by a frictionless pivot to a wall. a cable making an angle of 37o, attached to the beam 5 m from the pivot point,

a rigid rod of length and mass has small point like masses and attached as shown. here 0.08 kg, 0.6 m. the rod is spinning in a horizontal plane about a vertica

an 8.00 kg block of wood sits at the edge of a frictionless table, 2.20 m above the floor. a 0.500 kg blob of clay slides along the length of the table with a s