desmtay197 desmtay197

24-04-2024
Physics

Answered

A cubical box 400.0 Cm on each side is immersed in a fluid. The pressure at the top surface of the box is 115 200 Pa and the pressure on the bottom surface is 132.1 kPa . What is the density of the fluid ?

Answer :

MathPhys MathPhys

24-04-2024

Answer:

431 kg/m³

Explanation:

Hydrostatic pressure (P) is equal to the density of the fluid (ρ) times the acceleration due to gravity (g) times the depth of the fluid (h).

P = ρgh

ΔP = ρgΔh

132,100 Pa − 115,200 Pa = ρ (9.8 m/s²) (4.00 m)

ρ = 431 kg/m³

Answer Link

Other Questions

Avertical tube of radius 1.0 cm, open at the top to the atmosphere, contains 2.0 cm of oil ( oil = 082 water) oating on 3.0 cm of water. What is the pressure a

4. The density of the metal is 7800kgm³ and the density of water is 1000kgm³. The volume of the cylinder is 0.50m³. Calculate the force needed to lift the cylin

One method of measuring the density of a liquid is illustrated in the figure. One side of the U-tube is in the liquid being tested, and the other side is in wat

The density of water is 1.0g/cm³. What is the density of the oil in the left column of the U-tube shown below is: 2 cm oil 10 cm water

When the water from the sprayer in the previous problem hits the side of your house, it slows to a stop. If it hasn’t lost any energy since leaving the sprayer,

It a gas occupies a volume of 500 mL at a pressure of 800 mmHg, what will its volume be if the pressure is increased to 1200 mmHg while the temperature remains

The displacement vs. time for a small mass at the end of a spring is shown. At t=0, x=0.43 cm. (a) If m = 14.3g, find the spring constant k. (b) Write the equat

The square armature coil of an alternating current generator has 200 turns and is 20.0 cm on side. When it rotates at 3600 rpm, its peak output voltage is 120 V

a stream of oil is leaving a spigot of diameter 30.0 cm at a downward speed of 150.0 cm/s. it accelerates downward due to gravity. after 1/10 second, what is th