Despina Despina

25-04-2024
Physics

Answered

A generator uses a coil that has 80 turns and a 0.500−T magnetic field. The frequency of this generator is 60.0 Hz, and its emf has an rms value of 110 V. Assuming that each turn of the coil is circular, determine the length of the wire from which the coil is made ?

Answer :

Other Questions

A coil of 12Ω resistance is in parallel with a coil of 20Ω resistance. This combination is connected in series with a third coil of 8Ω resistance. If the whole

A 12 A current flows through the wire shown. What is the magnitude of the magnetic field (in T) due to a 0.3 mm segment of wire as measured at the following poi

The windpipe of a typical whooping crane is about 4.7 ft long. What is the lowest resonant frequency of this pipe, assuming that it is closed at one end? Assume

A charge of +6.0 x 10 C has a force of 4.8 x 10 N [left] acting on it. What is the magnitude and direction of the electric field there?

An accelerating voltage of 2.63 103 V is applied to an electron gun, producing a beam of electrons originally traveling horizontally north in vacuum toward the

When would the Sun’s magnetic field experience the most solar activity?

Two van de graaff generatos, whose centers are separate form one another by 0.6m each become charged after they are switched on. One van de graaff generator hol

Suppose a 24.4 kg block of aluminum (c = 900 J/(kg⋅∘C)) is being pushed down a steep ramp that is inclined at an angle of 65∘ from the horizontal by a 133 N for

an experiment is performed on an m=8.00g sample of an unknown material and produces the given heat curve. the temperature of the material is plotted a a functio