MaThWiZz5132 MaThWiZz5132

14-10-2022
Physics

Answered

if the wire is oriented so that the current flows in the direction you chose for part (e), what would the mass per unit length of the wire, μ, in grams per meter, need to be for the magnetic force to balance the weight of the wire?

Answer :

Other Questions

an aluminum wire with a diameter of 0.095 mm has a uniform electric field of 0.235 v/m imposed along its entire length. the temperature of the wire is 35.0°c. a

you have a motor with a shaft diameter of 25 mm from which you have hung a weight of 1.1 kg on a thin wire. (assume that the mass of the wire mass is very small

an aluminum wire having a cross-sectional area equal to 3.40 10-6 m2 carries a current of 3.00 a. the density of aluminum is 2.70 g/cm3. assume each aluminum at

the heating coil in a hair dryer is made of nichrome wire with a radius of 0.275 mm. if the coil draws a current of 8.85 a when there is a 120 v potential diffe

a rowboat is being pulled by two ropes tied to the front of the boat. one rope is along the x-axis direction and exerts a force of 50 n. the other is along the

Physics 11th Grade help needed before 4 pm 1. A man pulls a crate with a rope. The crate slides along the floor in the horizontal direction (x direction). The m

Consider a toy made out of a ball attached to a 7 inch string attached to a pole. the pole is motorized so that the ball at the end of the string moves in a ci

A body is under reaction two forces 6n and 8n find the resultant of two forces if (a) the forces are parallel and act in the same direction (b) the forces are p

the current in a single-loop circuit with one resistor r is 8.400 a. when an additional resistor of 9.00 ω is inserted in series with the existing resistance, t