weisenselkendall weisenselkendall

24-04-2024
Physics

Answered

an experiment is performed on an m=8.00g sample of an unknown material and produces the given heat curve. the temperature of the material is plotted a a function of heat added. in the table, T1= 45.2C, E1= 169 j, E2= 836J, E3=1430J, and E4= 2830J. other experiments determine that the material has a temperature of fusion of Tfusion= 237C and a temperature of vaporization of Tvapor=473C. calcualte the specific heat c of this material when it is a solid. calculate the specific heat c of this material when it is a liquid

Answer :

Other Questions

You pour 130 g hot coffee at 78.7°C and some cold cream at 7.50°C to a 115-g cup that is initially at a temperature of 22.0°C. The cup, coffee, and cream reach

A styrofoam cup is so light and is such a good insulator that its mass and heat capacity may often be neglected in experiments like this one, thus making the an

What characteristics are shared by both heating AND cooling curves? KE increases steadily. Phase changes happen when the temperature increases. Phase changes ha

(a) How much heat transfer (in kcal) is required to raise the temperature of a 0.950 kg aluminum pot containing 2.00 kg of water from 10.0°C to the boiling poin

Suppose a 24.4 kg block of aluminum (c = 900 J/(kg⋅∘C)) is being pushed down a steep ramp that is inclined at an angle of 65∘ from the horizontal by a 133 N for

200 50 50 Vapour pressure (kPa) 100 150 0 PTS PE A B P 25 50 75 100 125 Temperature (°C) 3.1 Define the term boiling point. Use the information given in the gra

What is the speed of sound in dry air if the temperature is 46°C?

why did the inflated balloon fall slower than the uninflated balloon of the same mass and material

helical spring has unextended length of 200mm. a load of 3N produces extension of 9mm. calculate the total length of the spring when an additional 2N is added t