Escobabr23726 Escobabr23726

22-01-2024
Physics

Answered

The arm of a crane at a construction site is 19.0 m long, and it makes an angle of 15.1°
with the horizontal. Assume that the maximum load the crane can handle is limited
by the amount of torque the load produces around the base of the arm. What maximum torque can the crane withstand if the maximum load the crane can handle is 736 N?
Answer in units of N. m.

Answer :

Other Questions

basketball player is standing on the floor 10.0 m from the basket as in Figure P4.60. The height of the basket is 3.05 m, and he shoots the ball at a 40.0o angl

You rub a balloon on your arm and the balloon gains a charge of 0.01 C. Your friend rubs a balloon on their arm and it receives a charge of 0.005 C. If the dist

what is the magnitude of the change in momentum of the block due to the horizontal force? ( A. 1.2 kg-m/s))

An object with the mass of 25g is rolling down a ramp with an inclination of 30˚ degrees off of the horizontal. The length of this ramp is 20 meters. There is a

A motor winds the rope in B with a constant acceleration aB. Because of the pulley system, the mass m in A slides in this way to the left over a horizontal axis

K = 9x10⁹ 91 = 0.036 C 92 = 0.006 C d = 8.334 m What is the force between the 2 charges?

A flint glass block (n = 1.68) is 7.31 cm thick and rests on the bottom of an aquarium tank. The upper surface of the block is 12.6 cm below the surface of the

Two objects are going towards each other. One has half the mass of the other, although they both have the same energy. If the one with greater mass weighs 2kg,

If the displacement of an object, x x, is related to time, t t, according to the relation x = A t x=At, the constant, A A, has the following dimensions