ryan3315 ryan3315

02-01-2023
Engineering

Answered

A hypothetical metal has an orthorhombic unit cell for which the a, b, and c lattice parameters are 0. 413 nm, 0. 665 nm, and 0. 876 nm, respectively. (a) If there are 8 atoms per unit cell and the atomic packing factor is 0. 536, determine the atomic radius (in nm). (b) If the density is 3. 99 g/cm3, calculate the metal's atomic weight (in g/mol)

Answer :

Other Questions

propeller of diameter D rotates at angular velocity in a liquid of density and viscosity . The required torque T is determined to be a function of D, , , and .

An engineer is designing a device to measure how the density of seawater changes with depth. The device consists of a hollow spherical metal container of known

Determine the force in members BC, CH, GH, and CG of the truss and state if the memt truss and state if the members are in tension or compression.

which relies on a concentration and dilution cycle? group of answer choices absorption chiller fan coil system unit ventilator induction unit flag question: que

A compact disc (CD) records audio signals digitally by using PCM. Assume that the audio signal bandwidth equals 15 kHz. (a) If the Nyquist samples are uniformly

A producer of fertiliser receives an order to supply exactly 5000 kg of fertilizer, consisting of a special mixture of phosphate and ammonium nitrate. The mixtu

if you are having a problem with a driver, which of the following is the least invasive solution?

The van travels over the hill described by y=(−1.5(10−3)x2+15)ft.(Figure 1) 1-If it has a constant speed of 75 ft/s, determine the x and y components of the van

The shaft of the motor M turns with an angular velocity ω = 100(4 t) rad/s, where t is in seconds (Figure 1) Part A Determine the distance the load W is lifted

The circuit above has already been converted into impedance form. Calculate the phasor of the current through the middle branch with the given polarity. Put you