bestielove8035 bestielove8035

30-12-2022
Engineering

Answered

The van travels over the hill described by y=(−1.5(10−3)x2+15)ft.(Figure 1) 1-If it has a constant speed of 75 ft/s, determine the x and y components of the van's velocity when x = 50 ft. 2-Determine the x and y components of the van's acceleration when x = 50 ft.

Answer :

Other Questions

Determine the angle θ between the y axis of the pole and the wire AB. 3 ft .y 2 ft 2 ft

a 20 ft x 20 ft x 10 ft office space requires 6 air changes per hour. what is the required ventilation rate in cfm?

If a particle moves along a path such that r=(2cost) ft and θ=(t/2) rad, where t is in seconds, plot the path r=f(θ) and determine the particle’s radial and tra

particle travels along a straight line with a velocity of v=(4t−3t2)m/s, where t is in seconds. Determine the position of the particle when t = 4.0 s .s=0 when

The electric field inside the dome of a highly-charged van de graaff generator is _________. Two Three Zero One

The shaft of the motor M turns with an angular velocity ω = 100(4 t) rad/s, where t is in seconds (Figure 1) Part A Determine the distance the load W is lifted

During a pregame warmup period, two basketballs collide above the hoop when in the positions shown. Just before impact, ball 1 has a velocityv 1 which makes a 2

Naturally found uranium consists of 99.274%, 238U, 0.720%235U, and 0.006% 233U (by mass). As we have seen, 235U is the isotope that can undergo a nuclear chain

Aluminum heat sinks of rectangular profile are com- monly used to cool electronic components. Consider a 7.62-cm-long and 9.68-cm-wide commercially available he

the two arms of the l-shaped handle on the spigot of (figure 1) have a length ratio of 1:3√. At what angle theta do you want to pull down on the end of the hand