princesincer8211 princesincer8211

30-12-2022
Engineering

Answered

An 8cm diameter hydraulic cylinder ha 4cm diameter rod if the cylinder receive flow of 100lpm and 12mpa

Answer :

Other Questions

A liquid with a specific gravity of 2. 6 and a viscosity of 2. 0 cP flows through a smooth pipe of unknown diameter, resulting in a pressure drop of 0. 183 lb/i

the 800-lb cylinder is supported by three chains as shown. take d=1ft. (figure 1)

water flows through a 2 m diameter penstock at a velocity of 2.5 m/s. it passes through an 87% efficient turbine/generator. what is the power output in kwe?

Troy must keep track of the amount of refrigerant he uses from a 50 pound cylinder to ensure that accurate records are kept he used 13 pounds on a system for ms

Determine the force in members BC, CH, GH, and CG of the truss and state if the memt truss and state if the members are in tension or compression.

if you are having a problem with a driver, which of the following is the least invasive solution?

An engineer is designing a device to measure how the density of seawater changes with depth. The device consists of a hollow spherical metal container of known

A refrigerator with refrigerant-134a a the working fluid i ued to keep the refrigerated pace at -30 oC by rejecting it wate heat to cooling water that enter the

which if there code segments will always correctly assign the maximum element of the array to the variable max 1. 1 only 2. 2 only 3. 3 only 4. 2 and 3 only 5.

The van travels over the hill described by y=(−1.5(10−3)x2+15)ft.(Figure 1) 1-If it has a constant speed of 75 ft/s, determine the x and y components of the van