garciarigoberto1098 garciarigoberto1098

30-12-2022
Engineering

Answered

Determine the angle θ between the y axis of the pole and the wire AB. 3 ft .y 2 ft 2 ft

Answer :

Other Questions

a 20 ft x 20 ft x 10 ft office space requires 6 air changes per hour. what is the required ventilation rate in cfm?

Determine the maximum tensile and compressive bending stress in the beam if it is subjected to a moment of M=4 kip. ft

During a pregame warmup period, two basketballs collide above the hoop when in the positions shown. Just before impact, ball 1 has a velocityv 1 which makes a 2

6.5 Determine the vorticity field for the following velocity vector: V=(x^2-y^2)i -2xyj

Consider the postfix expression: A-B+C*(D*E-F)/(G+H*K). The equivalent postfix (reverse Polish notation) expression is: A. AB-C+DE*F-GH+K**/ B. AB-CDE*F-*+GHK*+

Determine the force in member AB of the truss and state if the member is in tension or compression. Hint: The vertical component of force at C must equal zero.

Determine the minimum initial velocity and the corresponding angle at which the ball must be kicked in order for it to just cross over the 3 m high fence. Pictu

F9-1. Determine the centroid (x y) of the shaded area. 1 m 1 m Prob. F9-1

Part A Determine the force in members CD of the truss, and state if the member is in tension or compression. Take P = 1570lb FCD = Part B Determine the force in

the two arms of the l-shaped handle on the spigot of (figure 1) have a length ratio of 1:3√. At what angle theta do you want to pull down on the end of the hand