jcrist646 jcrist646

27-12-2022
Engineering

Answered

Determine the minimum initial velocity and the corresponding angle at which the ball must be kicked in order for it to just cross over the 3 m high fence. Picture shows distance from kicker to the fence (x) is 6m and fence is 3m high (y).

Answer :

Other Questions

6.5 Determine the vorticity field for the following velocity vector: V=(x^2-y^2)i -2xyj

A plastic coating is applied to wood panel by first depositing molten polymer on a panel and then cooling the surface of the polymer by subjecting it to air flo

118.2. Viscous heating in laminar tube flow (asymptotic solutions). (a) Show that for fully developed laminar Newtonian flow in a circular tube of radius R, th

1-25. Determine the resultant internal loadings acting on the cross section at points B and C of the curved member А C С- 450 2 ft 500 lb 30° 5 4 3 B Prob. 1-25

Chilled water enters a thin-shelled 5-cm-diameter, 150-m long pipe at 7°C at a rate of 0.98 kg/s and leaves at 8°C. The pipe is exposed to ambient air at 30°C w

Determine the force in member AB of the truss and state if the member is in tension or compression. Hint: The vertical component of force at C must equal zero.

Determine (a) the principal stresses and (b) the maximum in-plane shear stress and average normal stress at the point. Specify the orientation of the element in

It is desired to design a modulo-6 counter circuit that counts repeatedly through the length- 6 sequence of decimal numbers in that order: [0,4,5,2,3,1,â¦] Usin

Given: A structure is made up of members AC and CE. CE is fixed to ground at end E, whereas AC is pinned to CE at C and has end A constrained to move along a sm

A piston having a cross sectional area of 0.07m is located in a cylinder containing water as shown in the Figure 1. An open U-tube manometer is connected to the