nouraladl73 nouraladl73

29-12-2022
Engineering

Answered

Pneumatic nail drivers used in construction require 570 cm3 of air at 7 bar and 1 kJ of
energy to drive a single nail. You have been assigned the task of designing a compressed-air
storage tank with enough capacity to drive 500 nails. The pressure in this tank cannot
exceed 35 bar, and the temperature cannot exceed that normally found at a construction
site. What is the maximum pressure to be used in the tank and what is the tank’s volume?

Answer :

Other Questions

this house was designed by frank lloyd wright and is an example of . a. cantilever construction c. ferroconcrete construction b. domino construction d. s

Naturally found uranium consists of 99.274%, 238U, 0.720%235U, and 0.006% 233U (by mass). As we have seen, 235U is the isotope that can undergo a nuclear chain

Air flows through a pipe at a rate of 200 L/s. The pipe consists of two sections of diameters 20 cm and 10 cm with a smooth reducing section that connects them

Propane gas (C3H8) at 25C, 1 atm enters an insulated reactor operating at steady state and burns completely with air entering at 25C, 1atm. Plot the adiabatic f

A refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30 oC by rejecting its waste heat to cooling water that en

which nec article permits the disconnect switch for a large rooftop air conditioner to be mounted inside the unit?Step-by-step solution Step 1 of 1 The compress

Part A Determine the force in members CD of the truss, and state if the member is in tension or compression. Take P = 1570lb FCD = Part B Determine the force in

In this little assignment you are given a string of space separated numbers, and have to return the highest and lowest number in C++. Examples highAndLow("1 2 3

Aluminum heat sinks of rectangular profile are com- monly used to cool electronic components. Consider a 7.62-cm-long and 9.68-cm-wide commercially available he

which if there code segments will always correctly assign the maximum element of the array to the variable max 1. 1 only 2. 2 only 3. 3 only 4. 2 and 3 only 5.