rfernandez3956 rfernandez3956

19-12-2022
Physics

Answered

the following was obtained from a mass-spring-damper system design. 1. what is the damping condition of the system, i.e., is the system overdamped, critically damped, or underdamped? 2. calculate and plot the system response.

Answer :

Other Questions

The graph above shows the force exerted by a spring as a function of the length of the spring. A block on a frictionless table is pushed against the spring that

a 2-kg block is attached to a horizontal ideal spring with a spring constant of 200 n/m. when the spring has its equilibrium length the block is given a speed o

a spring has a natural length of 10 m. if the work done in stretching the spring from 10 m (its natural length) to 11 m is 5 2 joules, what is the force in newt

a piston compresses the air in the cylinder by doing 55.0 j of work on the air. as a result, the air gives off 181.0 j of heat to the surroundings. if the syste

a parallel circuit in a 12v system with four branches should have how many volts available to each branch?

Question 2 2. There is 100g mass on your desk to which you apply a 5N force. What is the acceleration of the 100g mass? (Ignore friction)

Find the mass for this problem

what if? if the hole is 10.0 m above the ground and the water is projected horizontally from the hole, how far (in m) from the base of the tank would a bucket h

a cat is balanced on the edge of a see-saw. the plank of the see-saw is 1m long, and the wedge is placed 0.25m away from the cat. if the wedge exerts of force o

calculate the force of earth's gravity on a spacecraft 2.50 earth radii above the earth's surface if its mass is 1200 kg .