what magnitude of (constant) force applied horizontally at the axle of the wheel is necessary to raise the wheel over a step obstacle of height h

Question

10-11-2022
Physics

Answered

what magnitude of (constant) force applied horizontally at the axle of the wheel is necessary to raise the wheel over a step obstacle of height h

Answer :

Other Questions

For a particular nonlinear spring, the relationship between the magnitude of the applied force f and the resultant displacement x from equilibrium is given by t

a ball rolls horizontally off the edge of a cliff at 4.00 m/s. if the ball lands a distance of 30.0 m from the base of the vertical cliff, what is the height of

an object moving with an initial velocity of 40 m/s takes 2.0 seconds to slow to a speed of 10 m/s. what is the magnitude of the acceleration of the object?

a spring has a constant of 125 n/m. if the spring is compressed a distance of 13 cm, what is (a) the force required to do this and (b) the potential energy stor

Which of the following is true of the magnitudes of tensions T₁, T2, and T3 in the ropes in the diagram shown? (A) The magnitude of tension T3 must be greater t

An object is moving with constant speed in a circular path. The object's centripetal acceleration remains constant in.

a ball is thrown vertically upward with a velocity of 20m/s from the top of a multistory building. the height of the point where the ball is thrown is 25 m from

A 2.55 kg bucket of sand is attached to a 1.31 m long rope and is swung in a vertical circle. At the bottom of the circle the tension in the rope is 30.2 N. Wha

when the speed of a rear-drive car is increasing on a horizontal road the direction of the frictional force on the tires is:

A football player pushes a training sled 20 meters while pushing with a constant force of 300 Newtons. If this is accomplished in 7.5 seconds, what power was ex

smecloudbird18 smecloudbird18 · Answer 1 · 2022-11-20T03:05:22-05:00

The engine's torque is transferred to the wheel's periphery and acts as a force pushing the road back (via friction between the tire and the road surface).

The car is propelled forward by the ground's reaction force (Newton's third law). There is a vertical downward force produced by the weight of the car.

Force can be applied to either the wheel or the axle of a wheel and axle. The input force is what is referred to as. The direction of the applied force cannot be altered by a wheel and axle.

To gain mechanical advantage, a tangential force applied to the big disk's periphery can apply a stronger force on a load coupled to the axle.

To know more about engine's torque

https://brainly.com/question/29344544

#SPJ4