to stop your vehicle when the brakes fail, a. work the parking brake gradually to prevent locking up the wheels and sending the car out of control. b. pump your foot down on the accelerator. c. shift up to a higher gear to slow the car down. d. all of the above

Question

21-10-2022
Physics

Answered

to stop your vehicle when the brakes fail, a. work the parking brake gradually to prevent locking up the wheels and sending the car out of control. b. pump your foot down on the accelerator. c. shift up to a higher gear to slow the car down. d. all of the above

Answer :

Other Questions

The driver of a car slams on the brakes, causing the car to slow down at a rate of 21.0ft/s^2 as the car skids 219ft to stop. How long does the car take to stop

1. You are driving at the speed of 30.9 m/s (69.1361 mph) when suddenly the car in front of you (previously traveling at the same speed) brakes and begins to sl

a driver sees another car approaching him from behind. he fears it is going to collide with his car. should he speed up or slow down in order to reduce damage?

the tires of a car are inflated to a gauge pressure of 2.0x105 pa. if the area of contact of each tire with the ground is 0.024 m2, what is the weight of the ca

a brief shift in the neuron’s electrical charge that travels down the axon is an _____

A car starts from rest and accelerates at a constant rate of 4. 2 m/s^2. How far has the car travelled after 12 seconds, given that it travels in a straight lin

A 1.8 meter long stretched rope consists of two parts, the first of which (on the hand side) has length x; and linear density u, double the length x; and to the

at exactly noon, you pass mile marker 142 in your car. at 2:30 p.m. you pull into a rest stop at mile marker 284. what was your average speed during this time?

alinakincsem alinakincsem · Answer 1 · 2022-10-31T07:56:45-04:00

The correct answer is option A.

To stop your vehicle when the brakes fail, work the parking brake gradually to prevent locking up the wheels and sending the car out of control.

Due to advanced technology, a complete brake failure has never occurred. However, there is the possibility of an unlikely scenario while driving your vehicle.

If you ever come across such an unfortunate situation where a brake failure occurs in your vehicle while driving here is the advice to act upon.

The few things which are essential to do are:

Keep pressing the brake pedal

Gradually pull down on the parking brake of your vehicle.

If it does not work, shift your attention to the lower gear and make sure one gear at a time to slow down your vehicle.

Drive into less hazardous areas make sure there are no people around you and do not turn off your engine until your vehicle is completely stopped.

If you need to learn more about Brakes click here:

https://brainly.com/question/26962373

#SPJ4