12-09-2022
Chemistry

Answered

Explain why you do not have to add water to a sealed container?

Answer :

safandsim safandsim

12-09-2022

Explanation:

Opening the container will be difficult due to the low pressure. But, if you manage to get it open, then air from outside will immediately rush in. The pressure will rise up to atmospheric pressure, and the boiling point of water will go back up to 100°C.

Answer Link

Other Questions

Why is the ph of a 0. 1 m solution of acetic acid in water higher than that of a 0. 1 m solution of hcl in water?.

If you were to do a 50% serial dilution, starting with a 10% concentration, how many dilutions would you have to make before getting to 2. 5% as your final conc

acetanilide has a solubility of 1.00 g/185 ml in 25 0c water and 1.00 g/10 ml in 100 0c water. if 250 mg of acetanilide was dissolved in 2.5 ml of water, how mu

Which are radioactive isotopes of oxygen? (hint: add protons until the name changes to oxygen. then, add neutrons until the isotope is radioactive.) select one:

you've purchased a 12 ounce can of frozen orange juice concentrate at kroger. the instructions tell you to mix the contents of the can (the frozen oj) with 36 o

The temperature is a beaker of water is 50 degrees Celsius. Kiley puts the water into a freezer. After a few minutes, she measured the temperature again. It is

In a combustion reaction 35.3 g of hydrocarbon reacts with 96.0 g of oxygen to produce water and carbon dioxide if 60.4 g of water is produced how much carbon d

suppose 10g of liquid water at 10c is placed in an insulated cup. if a 30g piece of metal at 131c is placed in the water and brought to equilibrium at 20c, wha

The amount of water leaking from a water tank can be modeled with the function f(x) = âˆ’x3 âˆ’ 10x2 âˆ’ x 120, where x measures the number of minutes since the

a coffee-cup calorimeter contains 130.0 g of water at 25.1 ∘c . a 124.0-g block of copper metal is heated to 100.4 ∘c by putting it in a beaker of boiling water