margaretofosu652 margaretofosu652

18-04-2024
Physics

Answered

A diverging lens of focal length 18.0m is used to view a shark that is 90.0m away from the lens, if the image formed is 1.0m long calculate the length of the shark

Answer :

Other Questions

You are using a converging lens to look at a splinter in your finger. The lens has a 9.0 cm focal length, and you place the splinter 6.9 cm from the lens.

Two infinitely long wires sit parallel to each other, both having current 32.1 A. If they are separated by a distance of 13.3µm, then what is the magnitude of t

Consider a wet banked racetrack, where there is a coefficient of static friction of 0.29 and a coefficient of kinetic friction of 0.24 between the tires and the

What magnitude of current would be necessary to produce a 14.8 mT magnetic field 19.4 mm away from an infinitely long wire? (please provide your answer to 1 dec

Set the wavelength of the light to 633 nm. Do this first! Find the critical incident angle at which the light beam just begins to show total internal reflection

a copper wire 40cm long carries a current of 6A and weight 0.36n a certaon magntic field strong enough to balance the force of gravitu on the wire what is the s

A ball is fastened to one end of a string 30.0 cm long with the other end fixed so that the string makes an angle of 36.87° with the vertical, as shown in the f

The mass of a load is double while the force acting on it is halves.The resulting acceleration of the load is ?

In the circuit shown in (Figure 1), neither the battery nor the inductors have any appreciable resistance, the capacitors are initially uncharged, and the switc