godloves200220 godloves200220

08-04-2024
Physics

Answered

A steel wire with mass 21.7 g and length 1.30 m is strung on a bass so that the distance from the nut to the bridge is 1.10 m. (a) Compute the linear density of the string. (b) What velocity wave on the string will produce the desired fundamental frequency of the E1 string, 41.2 Hz? (c) Calculate the tension required to obtain the proper frequency. (d) Calculate the wavelength of the string's vibration. (e) What is the wavelength of the sound produced in air? (Assume the speed of sound in air is 343 m/s.)

Answer :

Other Questions

A uniform cylinder of mass m and radius R is pivoted on frictionless bearings. A string of negligible mass is wrapped around the cylinder with the other end con

Two blocks are connected by a very light string passing over a massless and frictionless pulley. Traveling at constant speed, the 20.0N block moves 75.0cm to th

A mass of 2 kg in suspended by a spring passing over the pulley as shown in Figure. The system is supported horizontally by a spring of stiffness 500N/m. Given

In a nuclear point the initial mass is 6.3 and the final mass is 6.32 calculate the energy if the speed of light is 300000000 and 2 ev 1.6*10^-19

A 10-kg mass moving the velocity of 20 m/s strikes a wall and is brought to rest on 0.15 s. Calculate the average stopping on the force on the body

A continuous AC voltage with peak voltage of 8 V and frequency f=1010805 Hz is connected with a resistor (R=470 Ω), a capacitor with C=0.07 µF and an an inducto

In order to produce an end of 9volts,the area of the coil with it's axis coinciding with the direction of the magnetic field halved from the number of turns.Cal

A child 1.10m from the center of a merry go round moves with a speed of 1.25m/s calculate a. The centripetal acceleration of the child and b. The net horizontal

QUESTION 3 (Start on a new page) Two identical objects (A and B) are projected vertically upwards from the ground 0,04 seconds apart. Object A has an initial ve

A metal bar with length L, mass m, and resistance R is placed on frictionless metal rails that are inclined at an angle ϕ above the horizontal. The rails have n