chantalbahadori chantalbahadori

07-04-2024
Physics

Answered

Two rays of light converge toward each other, as shown in the figure(Figure 1), forming an angle of 27 ∘ . Before they intersect, however, they are reflected from a circular plane mirror with a diameter of 11 cm . If the mirror can be moved horizontally to the left or right, what is the greatest possible distance d from the mirror to the point where the reflected rays meet?

Answer :

Other Questions

In a double-slit experiment to determine an unknown wavelength of light, the measured total distance between 16 maxima (8 on each side of the central maximum) i

A uniform rod of mass M and length ℓ is pivoted at point P, which is ℓ/4 away from the left end, as shown in the figure below. The rod is released from rest whe

The speaker and two microphones shown in the figure are arranged inside a sealedcontainer filled with neon gas. The wires from the microphones are connected to

A long horizontal wire carries a current of. I sub T = 41.4 A. A second wire (I), made of 2.90 mm diameter copper wire and parallel to the first but L = 15.4 c

Two 2cm diameter disks face each other, 1mm apart. They are charged to 10nC. A. What is the electric field between the two disks. B. A proton is short from the

0.01967 8. A copper cylinder of length 8.0cm and an aluminum cylinder of length 3.0cm are stacked end to end, as shown in figure 3 below. Each cylinder has a ra

A thin layer of CaF2(n=1.41) is deposited onto glass, with n=1.52. The thin layer is viewed in reflected light as 45 degrees using a white light source (Fig.3).

Which is true about the cells of all living things? A. They all have the same size. B. They all have the same shape. C. They all reproduce. D. They all came fro

In an experiment to determine the thermal conductivity of a bar of a new metal alloy, one end of the bar is maintained at 1.20 oC and the other end at 108 oC. T

A steel wire of length 2.01 m with circular cross section must stretch no more than 0.290 cm when a tensile (stretching) force of 450 N is applied to each end o