lissajp79 lissajp79

08-02-2024
Physics

Answered

The block in the image has a mass of 1.00 kg. The coefficient of static friction between the block and the inclined plane is 0.661. The plane makes an angle of 36.8o with the horizontal direction. What is the minimum force that can be applied to the block to keep it from sliding down the plane?

Answer :

Other Questions

Two blocks, one sitting on a table and the other heavier one hanging over its edge, are connected by a light string as shown in the figure. newton3.gif Block 1

An object of mass 2.0 kg rests on a rough surface. A person pushes the object in a straight line with a force of 10 N through a distance d. The resultant force

23.4 Draw a free-body diagram and show all the forces being applied to the block at this stage.

A canon ball is 16m above the ground on an inclined plane. If the ball is made to ascend the plane at 54 m/s to a distance from its original position and descen

A canon ball is 16m above the ground on an inclined plane. If the ball is made to ascend the plane at 54 m/s to a distance from its original position and descen

A 19.7 kg person climbs up a uniform ladder with negligible mass. The upper end of the ladder rests on a frictionless wall. The bottom of the ladder rests on a

Hanging from the ceiling over a baby bed, well out of baby’s reach, is a string with plastic shapes, as shown here. The string is taut (there is no slack), as s

For a stunt plane traveling at a speed of 320 KM what is the minimum radius of downward arc that a pilot can fly without plug being forced upward into his head

An object in equilibrium has three forces extended on it. A 57.0 newton force acts at 90 degrees from the x axis and a 64 newton force acts at 40 degrees from t