17-01-2024
Physics

Answered

As the drawing shows, one microphone is located at the origin, and a second microphone is located on the +y axis. The microphones are separated by a distance of D = 1.72 m. A source of sound is located on the +x axis, its distances from microphones 1 and 2 being L1 and L2, respectively. The speed of sound is 345 m/s. The sound reaches microphone 1 first, and then, 1.21 ms later, it reaches microphone 2. Find the distances (in m) (a) L1 and (b) L2.

As the drawing shows one microphone is located at the origin and a second microphone is located on the y axis The microphones are separated by a distance of D 1 class=

Answer :

Other Questions

A source of sound is located at the center of two concentric spheres, parts of which are shown in the drawing. The source emits sound uniformly in all direction

An electron dipole is placed along the x–axis at the origin O. a point P is at a distance of 20 cm from this origin such that OP makes an angle θ with the x–axi

What affects the pitch of a sound

A charge of -0.3 µC is located at A( 25,-30,15) ( in cm), and a second charge of 0.5µC is at B(-10, 8, 12) cm. Find E at: (a) origin (b) P( 15, 20, 50) cm.

he +x -axis as east and the +y -axis as north. Consider the following vectors A⃗ , B⃗ , and C⃗ : A⃗ : 72.4 m , 32.0∘ east of north B⃗ : 57.3 m , 36.0∘ south of

A vibrating guitar string makes very little sound if it is not mounted on the guitar. But if this intensity. This is because vibrating string is attached to the

A wind instrument plays the mode middle C, frequency 262Hz, as an open column. What is the length of the instrument assuming speed of sound if 342m/s

The drawing shows a frictionless incline and pulley. The two blocks are connected by a wire (mass per unit length = 0.0289 kg/m) and remain stationary. A transv

Subject : Physics - Example Questions - Torque and Equilibrium: Question 1: Lever Balance A uniform meter stick of mass M is placed on a fulcrum at the 60 cm

The electric charge flowing through a wire and crossing its 2 cm2 section is described by the expression q(t) = 3 − 4t + 5t 2 where t is in seconds and q in cou