shortclips320 shortclips320

08-01-2024
Physics

Answered

An 18-gauge copper wire (diameter 1.02 mm) carries a current with a current density of 1.50 × 106 A/m2. The density of free electrons for copper is 8.5 × 1028 electrons per cubic meter. Calculate (a) the current in the wire and (b) the drift velocity of electrons in the wire.

Answer :

Other Questions

Fold a paper towel, place it in the bottom of a shallow bowl, and dampen it with tap water. You want to imitate Liberty's environment--moist with salt spray--so

15,000J is added to 2kg of water in a copper beaker of 1kg at 20 degrees what will the new temperature be?

A 480 V, 60 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of 1.0 Ω. Its full-load armature current is 60 A at 0.8 PF lagg

A hydrometer is made of tube of diameter 3.2cm. the mass of the tube and it's content is 60g. If it's float in liquid of density 600kgm-3 calculate the depth to

Exercise: A rock is launched at the castle wall at a 45° angle and 20m with an initial velocity 22m/s. The wall is 45m high. Assume that the rock is launched fr

acceleration is the rate at which velocity changes. Based on the diagram above, what is the acceleration of the rock meters per second squared?

A bus started running from 20m/s and accelerated at 5n/s² in 0.50 minutes. The bus maintain its maximum velocity reached after the end of the acceleration for a

two forces P and Q of magnitudes 5 and 3 units respectively are inclined at an angle of 30 degrees to each other. calculate the magnitude of the resultant and