smartinfo05 smartinfo05
  • 06-01-2024
  • Physics
Answered

A series R-L-C circuit consists of R = 10 ohm L=0.318 H and C = 63.6 µF. This circuit is supplied by source of emf given by e(t) = 100 sin314t. Find:
i) Expression for i (t)
ii) Phase angle between Voltage and current iii)Power factor of circuit
iv) Active power consumed ​



Answer :

Other Questions

voltage of V (RMS) volts. The resulting current I (RMS) is flowing in the circuit. Do a proper analysis of circuit, explaining the three cases: (i) When XL>
A 480 V, 60 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of 1.0 Ω. Its full-load armature current is 60 A at 0.8 PF lagg
Three point charges are placed at the corners of an equilateral triangle (triangle with equal length for all three sides). the values of the charges are q1=q3=1
two forces P and Q of magnitudes 5 and 3 units respectively are inclined at an angle of 30 degrees to each other. calculate the magnitude of the resultant and
how to answer this? by steps
The following data are obtained from a tensile test of a copper specimen. - The load at the yield point is 142kN. - Length of the specimen is 25 mm. - The yield