JoJoG9443 JoJoG9443

27-12-2022
Physics

Answered

if 15 kw of power from a heat reservoir at 500 k is input into a heat engine with an efficiency of 37%, what is the power output in kw?

Answer :

Other Questions

what is the efficiency of a heat engine that has a increase of 2300 j with a release of 400 j in a cyclical process?

what is the final temperature if it requires 5000 j of heat to warm 2.38892 x10^-2 kg of water that starts at 50c? remember cp for water is 4186 j/kg c

A 10 kg piece of aluminum(specific heat of 900 j/(kg c) ) is warmed so that its temperature is increases by 5 degrees celcius. how much energy was transferred i

it is very cold and my heat keeps turning off and on but not getting the house up to the thermostat what could be wrong

During a certain time interval, a constant force delivers an average power of 4 watts to an object. If the object has an average speed of 2 meters per second an

water is flowing at a rate of 2m3s through a tube with a diameter of 1m. if the pressure at this point is 80kpa, what is the pressure of the water after the tub

b) what is the voltage drop over two 12 awg conductors (resistance of 0.20 ohms per 100 m) supplying a 16 a load located 50 m from the power supply?

a model train powered by an electric motor accelerates from rest to 0.800 m/s in 22.0 ms. the total mass of the train is 880 g. what is the average power (in w)

A ball on the end of a tight string of length 2 m is released from a height of 50 cm. what is the velocity at the bottom of the swing

an object is drpped from rest from tje tpp of a 400m cliff on earth if air resistance is negligible, what is the distance the object travels druign the frist 6