tjglodowski1346 tjglodowski1346

23-12-2022
Physics

Answered

Quetion 4 g [ Block A and B have a ma of 100 kg and 150 kg, repectively. If the coefficient of tatic friction between A and B and between B and € i u, = 0. 25, and between the rope and the peg D and E ! = 0. 5, determine the mallet force F needed to caue motion of block B if P =30N

Answer :

Other Questions

if the coefficient of kinetic friction between a 26 kg crate and the floor is 0.34, what horizontal force is required to move the crate at a steady speed across

a rope goes from one building to another. the distance between the buildings is 12 m, and the rope is tied to each building at a point 8 m and 3 m high above th

compared to the speed of the heavier block, what is the speed of the light block after both blocks move the same distance d ?

sally scientist applies an equal force to two objects. the first has a mass of 40 kg and the second has a mass of 10 kg. if the first object accelerates at 10 m

a constant force of 25 n is applied as shown to a block which undergoes a displacement of 7.5 m to the right along a frictionless surface while the force acts.

if the density of the life preserver is 100 kg/m3kg/m3 and it is completely submerged, what must its volume be? assume that the density of the person to be abou

Jill i pulling a 15. 0 kg wagon with a force of 54 N at an angle of 31 degree from the ground. What i the force that move the wagon forward? What i the force th

a 10-kg piece of aluminum sits at the bottom of a pool, right next to a 10-kg piece of lead, which is much denser than aluminum. which one has the greater buoya

a 60 kg skier strats from the rest from top of a 50 m high slope. if work done by friction is -6 kj what is the speed of the skier on reaching the bottom of the

what is the distance between a nodal plane of b⃗ and the closest antinodal plane of b⃗ ?