elizabethatkins4186 elizabethatkins4186
  • 23-12-2022
  • Engineering
Answered

determine y¯, which locates the centroidal axis x′ for the cross-sectional area of the t-beam.



Answer :

Other Questions

determine the angle θ between the y axis of the pole and the wire ab.(figure 1)
draw the shear diagram for the beam. set m0 = 500 n⋅m, l = 8 m.
determine and its region of convergence. (b) determine (c) if keep the same system, but change the input , determine the output . h(t) x(t) h(s) y(t) , 2 2 ( )
draw the shear diagram for the beam. set p = 800 lb, a = 5 ft, l = 12 ft.
The bottom hole in the dam is blocked by a flat rectangular shield with a width of -6 m. The water depth in the upstream h1 = 23 m, the depth in the downstream
Draw the free-body diagram for the beam. A is a rocker and B is a pin. Draw the vectors starting at the black dots. The location and orientation of the vectors
determine the x, y, z components of reaction at the ball-and-socket joint a.
Draw the shear diagram for the beam. Set P = 800 lb, a = 5 ft. L = 12 ft. Click on "add discontinuity" to add discontinuity lines. Then click on "add segment" b
determine the shear stress at point b on the web of the cantilevered strut at section a–a.
determine the horizontal and vertical components of force at pins a and c of the two-member frame.