Christracks4011 Christracks4011

23-12-2022
Physics

Answered

estimate the total lift and drag forces on darkstar at mach 3 and mach 10. use just the sideview shock wave/expansion flow structures identified above. assume darkstar flies at a 5 degree angle of attack, and assume for simplicity that darkstar is a flat plate with shocks/expansions located lengthwise along the plate. s

Answer :

Other Questions

in fig. 30-45, two straight conducting rails form a right angle. a conducting bar in contact with the rails starts at the vertex at time t 0 and moves with a c

use the theory of elasticity and given applied pressure at the end of construction, determine the settlements at 2p and 3p

figure 30-58 shows a copper strip of width w 16.0 cm that has been bent to form a shape that consists of a tube of radius r 1.8 cm plus two parallel flat exte

A 20-N crate starting at rest slides down a rough 3 m long ramp, inclined at 30 degree with the horizontal. The force of friction between crate and ramp is 6 N.

figure 32-27 shows a closed surface. along the flat top face, which has a radius of 2.0 cm, a perpendicular magnetic field of magnitude 0.30 t is directed outwa

it's your birthday, and to celebrate you're going to make your first bungee jump. you stand on a bridge 120 mm above a raging river and attach a 33-mm-long bung

determine the mass flow rate (lbs/hr) of a liquid with a density of 58.30 pound (lbs/ft3) and a volumetric flow rate of 332 gpm. (round the final answer to near

An elevator travels up and down. The vertical position of the elevator in meters over time is shown below. Graph of vertical position x (in meters) on y axis an

a block of mass 2.57 kg lies on a frictionless horizontal surface. the block is connected by a cord passing over a pulley to another block of mass 5.2 kg which

1. A car of mass 1000kg heading up the M1 at 50m/s collides with a stationary truck of mass 8000kg and sticks to it. What velocity does the wreckage move forwar