harodkdc1943 harodkdc1943

23-12-2022
Computers and Technology

Answered

you are troubleshooting an older wireless network that is running wireless g (802.11g). this network appears to have a lot of collisions and interference. you look up the configuration on two of the three access points in the areas and see they are using channel 1 and channel 6. to prevent interference and ensure non-overlapping of the channels, what channel should the third access point utilize?

Answer :

Other Questions

when you are troubleshooting a network problem, what is one of the first steps you should take in the process?

a network technician connects three temporary office trailers with a point-to-multipoint microwave radio solution in a wooded area. the microwave radios are up,

in a controller-based network architecture, what is the name of the interface that is used to communicate between the controller and the deployed network device

what is the simplest and most cost-efficient way to allow other network users to access a printer if the printer does not have an rj-45 or wifi adapter availabl

A network administrator configures the port security feature on a switch. the security policy specifies that each access port should allow up to two mac address

Marta is worried that the facilities at linden state are not as up-to-date as they could be with respect to wi-fi access and the availability of classes on-dema

sensors that can monitor and report data about traffic and parking conditions are part of a network of physical objects known as the internet of technology. a.

Sensors that can monitor and report data about traffic and parking conditions are part of a network of physical objects known as the internet of technology.a. T

the sda underlay uses a well-known design called a routed access layer design. what are the features of a routed access layer design? (select two answers.)

which section of the tcp/ip five-layer network model contains the data the application wants to send?