stormz3135 stormz3135

21-12-2022
Engineering

Answered

50-kg bucket of concrete is suspended from a steel wire that is 1.0 mm in diameter 1.0 mm and 11.2 m long. what distance will the wire stretch? young's modulus for steel is 2.0 x 1011 pa

Answer :

Other Questions

If the beam is subjected to a bending moment of M-5kN.m, determine the bending stress developed at point A 50 m 50 mm min 150 mm 25mmM 25 mm 150 mm 50 mm

A pulse of sediment laden runoff is delivered to a pond. About how long it will take for soil particles with diameters of following sizes to settle to a depth o

The taylorian tool-life equation for machining C-40 steel with a 18 : 4 : 1 HSS cutting tool at a feed of 0.2 mm/min and a depth of cut of 2 mm is given by VTn

The post is made from 6061-T6 aluminum and has a diameter of 50 mm. It is fixed supported at A and B, and at its center C there is a coiled spring attached to t

find the following, assuming the truss does not deform out-of-plane: (a) the reaction forces at the supports. (b) the forces carried in each member. (c) the min

You have been asked to design a flexible pavement, and the following daily traffic is expected for design: 5000 single axles at 10,000 lb eacg, 400 single axles

y Estimating output from a turbine: the following data for a large turbine designed for high-wind areas is provided. The turbine swept area has a diameter of 80

Write the recurrence formula for the TIME COMPLEXITY of this function, including the base cases for N>=0. (You do NOT need to solve it.) (Note that it should

a crane with a 100-ft boom is being used to set a small load on the roof of the building shown. the minimum standoff (point a) from the corner of the building t

Water enters a 200 L tank at a rate of 10 g/s and is withdrawn at a rate of 10 g/s. The tank is initially half full – Draw and label process streams and flows –