herradarr0905 herradarr0905

11-12-2022
Physics

Answered

9. An Atwood's Machine consists of a cord passing over a frictionless, massless pulley as shown below. It has a 4.0-kg object tied to one end and a 12.0 kg object tied to the other. Compute the acceleration and the tension in the cord. (4.9m/s/s, 58.8N)

9 An Atwoods Machine consists of a cord passing over a frictionless massless pulley as shown below It has a 40kg object tied to one end and a 120 kg object tied class=

Answer :

Other Questions

Figure 7-40 shows a cord attached to a cart that can slide along a frictionless horizontal rail aligned along an x axis. The left end of the cord is pulled over

a pulley on a friction- less axle has the shape of a uniform solid disk of mass 2.50 kg and ra- dius 20.0 cm. a 1.50 kg stone is attached to a very light wire t

Two objects rest on a uniform surface. A person pushes both with equal force. If the first object starts to move faster than the second, what can be said about

Two objects rest on a uniform surface. A person pushes both with equal force. If the first object starts to move faster than the second, what can be said about

A metal drum has a mass of 200 when empty and 100 kg when filled with 1 m cubed of methylated spirit. What is the density of methylated spirit? A) 0.0050 kg/m3

4.00 mol of the helium is confined to a 4.00-L container at a pressure of 14.0 atm. The atomic mass of helium is 4.00 u, and the conversion between u and kg is

PLS HELP ON A DEADLINE A moon orbits a planet as shown above. The moon has a mass 0.66 x 1022 kg and the gravitational field strength at distance R is 0.0012 N/

PLS HELP ON A DEADLINE A moon orbits a planet as shown above. The moon has a mass 0.66 x 1022 kg and the gravitational field strength at distance R is 0.0012 N/

You are designing a hydraulic lift for an automobile garage. It will consist of two oil-filled cylindrical pipes of different diameters. A worker pushes down on

"The glider is released at a distance 1.47m from the bottom of the track. Use the acceleration value you obtained in Part C to calculate the speed of the glider