kendra9411 kendra9411

13-11-2022
Physics

Answered

Two masses (m₁ = 4.35 kg, ₁ = 12.0 cm, m₂ =9.40 kg, and r₂ = 20 cm) are connected to the ends of a homogeneous rod
(L = 82.5 cm, m = 11.3 kg). Find the x-coordinate for the center of mass of the three-object system in
centimeters.

x-coordinate c.o.m.
=

Answer :

Other Questions

A cube of wood with a density of 0.780 g/cm' is 10.0 cm on each side. When the cube is placed in water, what buoyant force acts on the wood? (pw 1.00 g/cm')

Will give Brainliest!A thin 2.50 kg box rests on a 5.50 kg board that hangs over the end of a table, as shown in (Figure 1).How far can the center of the box be

QUESTION 5 (Start on a new page.) A crate, with a mass of 25 kg, slides down a plane which is inclined at 15° to the horizontal. During the first part of the mo

Consider the Atwood Machine, assuming a massless pulley. Assume m1 > m2. Using N2, we found the acceleration of the system is: a = g(m1 − m2)/(m1 + m2) and t

The cavity insulation was tested. The heating inside the house was switched off. The temperature inside the house was measured every 20 minutes for 2 hours. The

Use the following position vs. time graph to answer the following: a) What is the average speed of the object between 0 and 50s? b) What is the instantaneous sp

Calculate the work done by a 40 N force pushing a 0.5 kg toy 2.3 m.

A cable exerts a constant upward tension of magnitude 1.38 ✕ 104 N on a 1.20 ✕ 103 kg elevator as it rises through a vertical distance of 2.50 m. (a) Find the w

What work is done by a forklift raising a 583 kg box a distance of 1.2 m?

An object is rotating about a fixed axis such that its rotational inertia about the fixed axis is 10 kg - m². The object has an angular velocity was a function