valeriaorrivera valeriaorrivera

12-11-2022
Physics

Answered

Monkey Joe is trying to prove how strong he is by pulling a 5000 kg truck. He applies a force of 6000N at an angle of 30 below the horizontal. The coefficient of kinetic friction is 0.01.

Then I need help with all the parts to the question seen in the picture.

Monkey Joe is trying to prove how strong he is by pulling a 5000 kg truck He applies a force of 6000N at an angle of 30 below the horizontal The coefficient of class=

Answer :

Other Questions

Monkey Joe is pulling his sled (8kg) of bananas along a horizontal (assume no friction). He pulls on the sled with a force of 55N at an angle of 30 above the ho

A very light ideal spring with a spring constant (force constant) of 2.5N/cm pulls horizontally on an 18-kg box that is resting on a horizontal floor. The coeff

A woman walks down a 50 m long hill that makes an angle of 40 degrees below the horizontal (see picture). What are the horizontal and vertical components of her

A 5 kg block is moved up a 30 degree incline by a force of 50 N, parallel to the incline. The coefficient of kinetic friction between the block and the incline

A 12-kg sled is lying on a hill with an incline of 21 degrees. If the sled it not moving what must the coefficient of static friction be (at least)?

A thin, light wire is wrapped around the rim of a wheel, as shown in the figure below. The wheel rotates without friction about a stationary horizontal axis tha

25pts When Joel is riding his bicycle, he and the bicycle have a combined mass of 91.4 kg. The coefficient of kinetic friction between the bicycle's tires and

An 82 kg painter stands on a long horizontal board 1.55 m from one end. This 27 kg board is uniform, 5.5 m long, and supported at each end by vertical posts. Wa

A 30.0 kg block is pulled 4.20 m along a smooth horizontal surface by an applied horizontal constant force while being moved the block accelerates from rest to

A point mass of 0.5 kg moving with a constant speed of 5m/s on an elliptical track experiecnces an outward force oof 10N when at either endpoint of the major ax