tjallen23 tjallen23

08-11-2022
Physics

Answered

Calculate the efficiency of a machine that requires 20 J of input work to do 10 J of output work. What is the efficiency of the machine? (in percent, but write the number only)

Answer :

Other Questions

How does the amount of work trevor performs going to the corner compare with the amount of work he performs coming back? they are the same because he uses the s

A brick is thrown upward from the top of a building at an angle of 25 to the horizontal and with an initial speed of 15 m/s. The brick hits the ground after 3.0

Work out the area of the following rectangles. 1) h 1½ cm 3cm 2)

5. In an emergency, the driver of a 1.3 x 10³-kg car slams on the brakes, causing the car to skid forward on the road. The coefficient of kinetic friction betwe

A child whose weight is 350 N swings out over a pool of water using a rope attached to the branch of a tree at the edge of the pool. The branch is 10.2 m above

A 0.1 kg ball is kicked from the edge of a cliff so that it attains a launch speed of 20 m/s at an angle of 37 to the horizontal, as shown above. On the axes be

Describe what is happening to the pressure and volume of the gas in the two diagrams below, assuming that the temperature of the gas does not change.

If an object is launched horizontally at a velocity of 30.5m/s from the top of a 27.0m tower, how far away does the object go? Please show work

A 8.1 kg block is dropped onto a spring of spring constant 3239 N/m from a height of 1300 cm. Find the speed of the block when the compression of the spring is

You’ve calculated the acceleration for both the boy and the man above. Now enter that information into the table below and calculate the frictional force experi