guoxinyi233 guoxinyi233

05-11-2022
Physics

Answered

The toy car in Figure 20 runs off the edge of a table that is 1.225m high. The car lands 0.4000m from the base of the table. Show all work.
How long did it take the car to fall?

Answer :

Other Questions

A 975-kg car accelerates from rest to 26.7 m/s in a distance of 120 m. What is the magnitude of the average net force acting on the car?

A 1,100 kg car is traveling at 20 m/s as it begins going down a 40 m hill. What is its total mechanical energy?(1 point) A 651,200 J B 211,200 J C 431,200 J D 2

The force acting on a particle varies as in the figure below. (The x axis is marked in increments of 10.0 m.) Find the work done by the force as the particle mo

To review the concept of conservative forces and to understand that electrostatic forces are, in fact, conservative. As you may recall from mechanics, some forc

A brass nameplate is 2.00 cm x 10.0 cm x 40.0 cm in size. A force F of 6.00 x 105 N acts on the upper left side and the bottom right side, as shown in the figur

find the drag force on a car traveling at 15 m/s. assume that the cars' cross-sectional area is 3.5 m^2, and that air has a density of 1.2 kg/m^3

1. At a local farm, you buy a few pumpkins to turn into Jack-o-Lanterns and place them on the backseat of the car. On the way home, you begin to brake as you ap

A pair of point charges, q = +8.00 μC and q′= -5.00 μC , are moving as shown in the figure (Figure 1) with speeds v= 9.50×10^4 m/s and v′= 6.50×10^4 m/s . The c

An object is launched with an initial velocity of 25.0 meters per second at an angle of 30° above horizontal. a. Determine the components of the initial veloci

n 1831, Michael Faraday was the first to realize that an electric current could be induced by passing a magnet through a coil of copper wire. Which factor is M