ledaiminh7450 ledaiminh7450

04-11-2022
Physics

Answered

A nonmechanical water meter could utilize the hall effect by applying a magnetic field across a metal pipe and measuring the hall voltage produced. What is the average fluid velocity in a 3. 50-cm-diameter pipe, if a 0. 750-t field across it creates a 75. 0-mv hall voltage?.

Answer :

Other Questions

what is the difference in pressure between the small pipe (1 cm diameter) and the large pipe (3 cm diameter), assuming that these two pipes are connected and th

the maximum magnitude of the electric field in an electromagnetic wave is 490 v/m. what is the maximum magnitude of the magnetic field in this wave?

the picture tube in an old black-and-white television uses magnetic deflection coils rather than electric deflection plates. suppose an electron beam is acceler

is the field line pattern created by a magnetic dipole far from the source of the fields the same as the field line pattern created by an electric dipole?

if the magnetic field steadily decreases from b to zero during a time interval t , what is the direction of the induced current?

a proton, traveling with a velocity of 3.8 106 m/s due east, experiences a magnetic force that has a maximum magnitude of 7.0 10-14 n and a direction of due sou

an electron moving along the x-axis enters a magnetic field. if the electron experiences a magnetic deflection in the -y direction, then the magnetic field must

As the current in the wire increases, the magnetic field around the wire increases in magnitude without changing its direction. Does this affect the flux throug

a wire has a length of 4.40 10-2 m and is used to make a circular coil of one turn. there is a current of 2.20 a in the wire. in the presence of a 2.80-t magnet

if the current in the wire were to be increased by a factor of 4, how would the strength of the magnetic on the loop change?