PulsedUp PulsedUp

30-10-2022
Physics

Answered

A sled is dragged along a rough horizontal path at a constant speed of 1.5 m/s by a rope that is inclined at an angle at 30° with respect to the horizontal, as shown right. The total weight of the sled is 470N. The tension force in the rope is 260 N. (a) Calculate the net force acting on the sled.

A sled is dragged along a rough horizontal path at a constant speed of 15 ms by a rope that is inclined at an angle at 30 with respect to the horizontal as show class=

Answer :

Other Questions

Suppose the ski patrol towers a rescue sled and victim, having a total mass of 90.0 kg, down a 8 = 52.0degree slope at constant speed, as shown in Figure 6.22.

Calculate the component of a force of 200N at direction of 60 degree to the force.

A box is pulled by a force of 47 N that forms an angle of 35 degrees above the horizontal, the distance the box travels is 3 m. During the journey, the box perf

A rope and pulley system is used so that a 20N force can lift a 60N weight. What is the minimum number of ropes in the system that must support the weight?

A horizontal force 49.8 N is applied to a chair of 21.2 N to move it 7 m along a horizontal surface. The coefficient of kinetic friction between the chair and t

A block is at rest on an inclined plane as shown in the diagram. As angle O is increased, the component of the block's weight parallel to the planeA ~ decreases

A 15 kg piece of furniture slides down a ramp 6.5 m long. The incline of the ramp is 32 degrees above the horizontal. The friction force acting during the journ

Two spheres A and B are placed in the arrangement shown below. (a) If mA = 2m and mB = 7m, where on the dashed line should a third sphere C of mass 7m be placed

2a. How would the amount of force on the head compare to the amount of force on the object it collides with in each system A, B, and C? (highlight your choice b

PART 2: MOTION Which objects did you choose to put onto the skateboard? Complete the simulation for three different trials. Complete the chart below, using the