kekejones2613 kekejones2613

24-10-2022
Chemistry

Answered

a beaker containing 0.400g khp was titrated with naoh solution. the pale pink end point was reached after 18.66ml of naoh solution was dispensed. what is the molarity of the naoh solution

Answer :

Other Questions

would the calculated molar mass be too high or too low if your standardized naoh were exposed to the air for a long period of time after the standardization? ex

a cu2 standard solution was prepared by diluting 1.50 ml of 3.95 x 10-2 m cu2 stock solution to a total volume of 25.00 ml. what is the concentration of cu2 in

aqueous ammonia is commercially available at a concentration of 16.0 m. how much of the concentrated solution would you use to prepare 500.0 ml of a 1.90 m solu

n the laboratory you dissolve 23.4 g of manganese(ii) sulfate in a volumetric flask and add water to a total volume of 500 ml. what is the molarity of the solut

a solution is found to have a ph of 8.04. which solid was most likely added to the water? a solution is found to have a ph of 8.04. which solid was most likely

n the laboratory you dilute 4.49 ml of a concentrated 12.0 m nitric acid solution to a total volume of 150 ml. what is the concentration of the dilute solution?

how much volume in ml will you need to take from 2.7 m concentrated stock solution if you would like to prepare a diluted 0.8 solution with 100 ml? report and r

suppose you have a solution that is made by combining 25 grams of salt (the solute) with 75 grams of water (the solvent). what is the mass percent of the salt?

you need a 80% alcohol solution. on hand, you have a 110 ml of a 45% alcohol mixture. you also have 90% alcohol mixture. how much of the 90% mixture will you ne