smart54231 smart54231

13-10-2022
Physics

Answered

a 2000 kg elevator with broken cables in a test rig is falling at 4.00 m/s when it contacts a cushioning spring at the bottom of the shaft. the spring is intended to stop the elevator, compressing 2.00 m as it does so. during the motion a safety clamp applies a constant 17,000 n friction force to the elevator.

Answer :

Other Questions

when you weigh yourself on good old terra firma (solid ground), your weight is 545 n . in an elevator your apparent weight is 470 n . what is the magnitude of t

A 10,000 N elevator is going upward and gaining speed. It is pulled upward by 4 steel cables, each exerting a 4,000 N tension force. What’s the net force?

everything in this tutorial will concern a single physics system: a rigid pendulum plus a torsion spring, with spring constant \kappaκ. a torsion spring works j

a 1240 kg satellite orbits the earth at an altitude of 80.4 km. it is desired to increase the altitude of the orbit to 334 km. how much energy must be added to

a pressurized tank contains 1.5 lb of air at 140f and 30 psia . mass is allowed to flow from the tank until the pressure reaches 15 psia. however, during the pr

if the jet is moving at a speed of 1040 km/h at the lowest point of the loop, determine the minimum radius of the circle so that the centripetal acceleration at

if the jet is moving at a speed of 940 km/h at the lowest point of the loop, determine the minimum radius of the circle so that the centripetal acceleration at

now evaluate the magnitude of the holding force of the wooden block on the nail by assuming that the force necessary to pull the nail out is the same as that ne

a stockroom worker pushes a box with mass 12.0 kg on a horizontal surface with a constant speed of 3.30 m/sm/s . the coefficient of kinetic friction between the