SpencerT6488 SpencerT6488

07-10-2022
Chemistry

Answered

an irregularly shaped stone was lowered into a graduated cylinder that was holding 2.0 ml of water. the height of the water rose to 7.0ml. if the mass of the stone was 25g what was its density

Answer :

Other Questions

describe, step-by-step, how will you prepare 10 ml of 0.050 m hcl from a 0.10 m solution of hci? assume that you use a 100-ml graduated cylinder (in which volum

Takisha conducted an experiment to determine the effect of salt on the boiling point of water. She measured the boiling points of 100 ml of water with salt adde

A different mass of sodium hydroxide was used to make another 25.0 cm' solution. 35.0 cm' of 0.250 mol/dm' hydrochloric acid was required to neutralise this sol

in the lab you found the acrylic density cube was found to have a volume of 1.01 cm3. what would you predict the volume to be in milliliters using the water dis

Water is leaking from the bottom of a conical cup that is 20 inches across and 20 inches deep. Given that the cup loses 0. 5 cubic inches of water per minute, a

in an experiment, 200 g of aluminum (with a specific heat of 900 j/kgk) at 100 degrees celsius is mixed with 50.0 g of water at 20.0 degrees celsius, with the m

polypropylene has a density of 0.90 g/cm3. explain why 4 different-sized cylinders made out of this material would not be able to be used in this experiment (fo

imagine a beaker of water into which we place two drops of red food coloring and one drop of blue food coloring. the drops land in different places on the surfa

a mixture contains n a h c o 3 together with unreactive components. a 1.62 g sample of the mixture reacts with h a to produce 0.561 g of c o 2 . the molar mass

if you were given a ruler that had markings to the mm on it, explain how you would have been able to use a ruler to determine the density of the polypropylene c