poncevan6856 poncevan6856

07-10-2022
Physics

Answered

What electric field e′ would have been required to create a current of 30. 0 amperes in a copper gauge 10 wire with diameter d equal to 0. 259 centimeters?.

Answer :

Other Questions

Remembering that the current in the filament is proportional to the electric field, what is the current in the filament following the doubling of its length?.

10. An electric field of 2250 N/C is produced by a charge of 4.82 x 10-¹¹ C. For this field strength, what is the distance to the charge? (ke 8.99 x 10⁹ Nm²/C²)

how long would it take 0.50 A current to pass 1260 C?

A boat that can travel on still water at a speed of 3.0 m/s WANTS to travel NORTH perpendicular to the river current. If the river current is 1.2 m/s EAST, in w

a 1-mm-thick copper plate (k 5 386 w/m·k) is sand- wiched between two 5-mm-thick epoxy boards (k 5 0.26 w/m·k) that are 15 cm 3 20 cm in size. if the thermal co

Given that the density of water is 1 × 103 kg m−3, how deep would you have to dive to experience an absolute pressure of 2 atm? How deep would you have to dive

Mandy is an engineer at an oxygen tank supply company. She conducted an experiment to find possible tank sizes. The maximum pressure in the tank cannot be more

Now you are the teacherRead this information below, then write two questions you could ask with the given InformationEach question must include one of the follo

aboat os 240km due east of the harbour . acurrent flowing due south and the boat captain wishes to set acourse so he can get to the harbour directly . He sets t

Jaron left his home and ran 98 meters to dunkin donuts. He turned around to return home and stopped at his neighbors house that was 10meters from dunkin donuts,