mogerr45 mogerr45

03-10-2022
Physics

Answered

A Bullet of mass 1.50 x10^-3kg is fired at 120m sec into a thick block of wood. How much work does the bullet do in coming to rest within the wood?

Answer :

Other Questions

A 0.050 kg bullet strikes a 5.0 kg wooden block with a velocity of 909 m/s and embeds itself in the block which then flies off its stand. What was the final vel

A 5.640 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μ = 0.555 and the coefficient of kinetic fr

A large globe, with a radius of about 5 m , was built in Italy between 1982 and 1987. Imagine that such a globe has a radius R and a frictionless surface. A sma

A projectile is fired at 40 m/s at 60º above the horizontal. What are the magnitudes of total acceleration (a), centripetal acceleration (ac) and tangential acc

This diagram represents a top-down view of an experiment on a table. The 250 g and 100 g masses are falling and are pulling the block. Draw an arrow to show whi

A pile of 500 sheets of paper has a mass of 2.0 kg. The pile is 300 mm long, 200 mm wide and 50 mm thick. Calculate: a) the thickness of one sheet b) the mass o

In order to go from rest to 50 m/s in 10 seconds, a jet must be able to accelerate at 2m/s^2 5m/s^2 20m/s^2 50m/s^2

Calculate How much thermal energy must be added to 0.96 kg of water at 100 °C to make steam at 100 °C?

Determine the work done (in kJ) in moving a truck, mass 4047 kg, for a distance of 131 m up a slope of 1 in 50, if the tractive resistance of the truck is 153 N

Calculate How much thermal energy must be added to 1.75 kg of copper to change it from a solid at 1358 K to a liquid at 1358 K?