darliner7717 darliner7717

08-09-2022
Chemistry

Answered

questionwhich procedure involves a physical change in one of the substances?separating an oil from solution by cooling itseparating an oil from solution by cooling itcreating salt by reacting sodium metal and chlorine gascreating salt by reacting sodium metal and chlorine gasallowing a nail to rustallowing a nail to rustbuilding a model rocket propelled by mixing baking soda and vinegar

Answer :

Other Questions

How much concentrated solution would you take to prepare 1.25 l of 0.115 m hno3 by mixing with water?

The volume of a metal cylinder was measured indirectly by water displacement three times the following volume readings were recorded calculate the average volum

A rectangular block of copper metal weighs 1896 g. The dimensions of the block are 8.4 cm by 5.5 cm by 4.6 cm. From this data, what is the density of copper?

A rectangular block of copper metal weighs 1896 g. The dimensions of the block are 8.4 cm by 5.5 cm by 4.6 cm. From this data, what is the density of copper?

1.541 ± 0.001 g of hydrated oxalic acid crystals were dissolved in distilled water. The solution was placed in a 250.0 ± 0.5 cm3 volumetric flask and the total

What is the volume (in cm^3) of a 25.2 g piece of metal with a density of 8.75 g/cm3?

Calculate the joules of heat released by a piece of lead when this heated metal is placed in a calorimeter filled with 40.0 mL water at 17.0oC and increases the

Note: Vol. volume. Since the bolt has an irregular shape, find its volume by displacement only. 1. Calculate the volumes of the samples used in Procedure step

Q 1: Fill in the blanks:- 1. Matter is made up of small_________ 2. The forces of attraction between the particles are _______ in solids, ______ in liquids and

How much heat is absorbed by 2.50 x 10^2 g of water and the 450. g Al can (C of Al is 0.900 J/g °C) when they are heated from 10.0 °C to 85.0 °C?