MelissaKatlego MelissaKatlego

04-09-2022
Chemistry

Answered

if the concentration of the hydrochloric acid used in this experiment was 2.00mol/dm3.Calculate the minimum volume of hydrochloric acid required to react completely with magnesium

Answer :

Other Questions

1.541 ± 0.001 g of hydrated oxalic acid crystals were dissolved in distilled water. The solution was placed in a 250.0 ± 0.5 cm3 volumetric flask and the total

5 Kezi heats 0.12 g of magnesium in air. It burns to make 0.20 g of magnesium oxide. What mass of oxygen has joined to the magnesium in this reaction?

Element Z is shiny, a good conductor of heat and electricity, very brittle and does not react with acid. Which of the following elements is most likely element

The volume of a metal cylinder was measured indirectly by water displacement three times the following volume readings were recorded calculate the average volum

Note: Vol. volume. Since the bolt has an irregular shape, find its volume by displacement only. 1. Calculate the volumes of the samples used in Procedure step

What is the volume (in cm^3) of a 25.2 g piece of metal with a density of 8.75 g/cm3?

Describe a method to obtain a pure sample of 3-nitrobenzoic acid from the impure solid, determine the percentage yield and check its quality

23. Record the volume of water for each of the following beakers to the correct number of sig figs. 24. Using your recorded measurements from #20, calculate the

The half-life of a first-order reaction is 13 min. If the initial concentration of reactant is 0. 085 m, it takes ________ min for it to decrease to 0. 055 m.

Calculate the joules of heat released by a piece of lead when this heated metal is placed in a calorimeter filled with 40.0 mL water at 17.0oC and increases the